NOTE: COMMENTS REGARDING ANY FEDERAL REGISTER NOTICE MUST BE SENT TO THE ADDRESS INDICATED IN THE DOCUMENT. ANY COMMENTS ON THE RAPID INFORMATION BULLETIN BOARD SYSTEM (RIBBS) ABOUT ANY FEDERAL REGISTER NOTICES WILL NOT BE USED OR CONSIDERED IN THE COURSE OF ANY RULE MAKING. [Federal Register: January 31, 1995] ======================================================================= ----------------------------------------------------------------------- POSTAL SERVICE 39 CFR Part 111 Revisions to Weight and Preparation Standards for Barcoded Letter Mail AGENCY: Postal Service. ACTION: Final rule. ----------------------------------------------------------------------- SUMMARY: This amends the final rule published on December 22, 1994, to detail the rate applicable to pieces that cannot qualify for a Barcoded First-Class rate because of presort. Basically, this amendment allows such pieces to qualify for the Nonpresorted ZIP+4 rate on an exceptional basis. EFFECTIVE DATE: January 16, 1995. FOR FURTHER INFORMATION CONTACT: Anthony M. Pajunas, (202) 268-3669. SUPPLEMENTARY INFORMATION: On December 22, 1994, the Postal Service published in the Federal Register (59 FR 65967-65971) a final rule to amend the Domestic Mail Manual (DMM) standards for the physical characteristics of automation-compatible barcoded letter-size mail. For a period of up to 1 year, beginning January 16, 1995, the Postal Service will conduct a test of live barcoded bulk third-class regular rate letter mail weighing between 3.0 and 3.3071 ounces, and barcoded bulk third-class nonprofit rate, First-Class and second-class letter mail weighing between 3.0 and 3.3376 ounces. The revised DMM standards implemented for this test of ``heavy letter mail'' included that each such mailpiece be part of a mailing that is 100 percent delivery point barcoded; have the barcode in the address block; be in an envelope that has no open windows; and not be bound or have stiff enclosures. Although Barcoded rates would apply to all pieces in such mailings at second- and third-class rates (level A, B3, and B5 Barcoded second- class rates, and basic, 3-, and 5-digit Barcoded third-class rates), pieces in the residual portion of First-Class mailings (i.e., those that could not qualify for the 3- or 5-digit Barcoded rates because of presort). Accordingly, under the final rule, these First-Class heavy letter mailpieces would not be eligible for another ``basic'' Barcoded rate. (The First-Class nonpresorted Barcoded rates are available only for flats and cards.) The amendment to the final rule appearing below corrects this oversight by adding language in the DMM that makes it clear that the rate applicable to such pieces is the nonpresorted ZIP+4 rate, the same rate available to other barcoded letter-size First-Class Mail in [[Page 5861]] similar presort circumstances. For clarity, the revised text of DMM C810.1.5 below replaces the text of DMM C810.1.5 and 1.6 that appeared in the final rule, and amends the reference in DMM C810.2.3 for consistency; the revised text of DMM E147.1.1c also removes an erroneous reference to ZIP+4 barcodes.This revision does not alter the thickness standards for heavy letter mail or other mail at a ZIP+4 or Barcoded rate; does not affect the weight or other eligibility criteria for nonpresorted ZIP+4 mail generally; and does not extend the availability of the nonpresorted ZIP+4 or any other ZIP+4 rate to other delivery point barcoded pieces weighing more than 3 ounces or non- delivery point barcoded pieces weighing more than 2.5 ounces. The revised rule allows the nonpresorted ZIP+4 rate for pieces weighing more than 3 ounces only if those pieces are delivery point barcoded and part of an otherwise correctly prepared Barcoded rate mailing of heavy letter mail prepared for this test. List of Subjects in 39 CFR Part 111 Postal Service. For the reasons discussed above, the Postal Service hereby adopts the following amendments to the Domestic Mail Manual, which is incorporated by reference in the Code of Federal Regulations (see 39 CFR part 111). PART 111--[AMENDED] 1. The authority citation for 39 CFR part 111 continues to read as follows: Authority: 5 U.S.C. 552(a); 39 U.S.C. 101, 401, 403, 404, 3001- 3011, 3201-3219, 3403-3406, 3621, 3626, 5001. 2. Revise the Domestic Mail Manual as noted below: C810 Letters and Cards 1.0 GENERAL DIMENSIONS * * * * * 1.5 Barcoded The weight of each piece in a Barcoded rate mailing must not exceed 3 ounces, except that until January 14, 1996, the maximum weight is 3.3363 ounces (or 3.3067 ounces if mailed at regular bulk third-class rates) for heavy letter mail (i.e., pieces that meet additional barcoding standards in C840, are prepared in an envelope, and are part of a 100% delivery point barcoded mailing). 2.0 PROHIBITIONS * * * * * 2.3 Heavy Letter Mail Heavy letter mail (under 1.5) may not be prepared as a self-mailer or bound or booklet-type mailpiece. * * * * * E147 Nonpresorted ZIP+4 Rate 1.0 BASIC STANDARDS 1.1 All Pieces * * * * * c. Meet the physical standards in C810, except: (1) The maximum weight of each piece is 3 ounces if at least 85% of all pieces in the mailing are correctly delivery point barcoded. (2) The maximum weight of each piece is 3.3376 ounces for pieces in the residual portion of a 3- or 5-digit Barcoded rate mailing of heavy letter mail, as defined in C810. * * * * * R100 First-Class Mail * * * * * Weight Not Over (ounces) Nonpresorted--ZIP+4 * * * * * 4 [ounces] $0.995 (Weight not to exceed 2.5 ounces except under E147) * * * * * A transmittal letter making these changes in the pages of the Domestic Mail Manual will be published and will be transmitted to subscribers automatically. Notice of issuance will be published in the Federal Register as provided by 39 CFR 111.3. Stanley F. Mires, Chief Counsel, Legislative. [FR Doc. 95-2339 Filed 1-30-95; 8:45 am] BILLING CODE 7710-12-P